Benthic Scuba Center is your one-stop shop for great equipment, certifications, air fills and rentals.
1 (519) 944-16001 (844) 313-DIVE (3483)
Email: [email protected]
Benthic Scuba340 Croft Drive Tecumseh, ON N8N 2L9
Showing 1–30 of 178 results
Use them if your fins are a little too big or you kick hard.
Highland Weight Plates are a quick and easy way to add blocks of lead to a 2 in. (50mm) wide piece of webbing such as a harness or weight belt.
Don’t be fooled by the good looks! The Voyager 60 is, above all else, a dive bag. The all-terrain wheels, coupled with backpack straps and 5
handles, gets your bag to your dive destination with ease. The Voyager 60 will not rust and can be hosed out after each outing.
This Item Ships For Free!
Connects right & left modular valves together to build a XS Scuba isolation manifold.
Standard yoke outlet primarily used for aluminum cylinders.
Dedicated 300 bar DIN outlet.
This manifold has a one-piece safety assembly protected within the body of the valve.
This item ships for free!
Modular valve that can be configured to a left hand or right hand style. Can be used for either a 3000 PSI tank or a HP Steel 3442 PSI tank.
Standard yoke outlet with spin-out DIN insert that converts to 230 bar DIN outlet.
Standard yoke outlet with spin-out DIN insert that is compatible with old 71.2cf steel cylinders.
Standard yoke outlet with spin-out DIN insert that has a black PVD finish.
Convert your DIN first stage to a standard yoke inlet.
Connects right & left Modular valves together to build a Thermo Isolation Manifold.
Trust the valve the professionals use.
The Thermo DIN valve is for those divers who use a dedicated 300 bar regulator on all their dives.
Configurable manifolds with a high gas flow for optimum regulator performance.
Modular valves intended for the attachment of DIN first stage only.
Modular PRO valves that can be configured to your diving style.
These adapters are compatible with both XS Scuba and Thermo Modular valves.
If you plan to use Nitrox (up to EAN40) or if you need to switch between yoke and DIN regulators, then the Thermo PRO valve is the valve for you.
Increase comfort and reduce jaw fatigue.
Protect the ends of your second stage and hose when the second stage is disconnected from the hose.
Wash the Inside of Your Buoyancy Compensator to Remove the Build Up of Salt Crystals and Foreign Deposits.
Add a quick-disconnect to most regulators or full face mask.
Machined from marine brass.
340 Croft Dr.
Tecumseh, ONCanada N8N 2L9