- Dive modes: Air, Nitrox, Gauge AVG, Freediving
- Settable mix: 2
- Algorithms: Buhlmann ZHL-16B
- Algorithm adjustment: 6 User settable protection levels
- Bezel: Stainless Steel
- Top Glass: Mineral
- Wireless transmitter: Compatible (Optional)
- Display: 40mm, 80×80 pixel
- Max Depth: 150m, 500ft
Compatible with the new Color-Coded Wireless Transmitter.
A state of the art Wireless Air Transmitter that flashes up in green, yellow or red according to your tank’s pressure during the whole dive.
You see your tank pressure from your iDive, your buddy or your instructor from your CC Transmitter.
Rechargeable with the same USB cable of the iDive.
Shield for iDive (Sold separately)
The best way to protect your iDive’s screen from scratches and bumps. It is almost impossible to pierce.
Self healing and Replaceable by the user. Small scratches are self healed by the soft shell of the Shield, and if it is too scratched you can change it by yourself with a new one in few seconds.
Smart Edges design.
The iDive Sport bezel design has a dedicated slot for the Shield to prevent accidental lifts-off and to create a smooth design without edges.
New Led Super Bright technology.
A bright full back light has never been seen before in a watch computer.
Big and Bright Data, You will read it just fine.
Size does matter:
The dive data on the iDive are from 15% to 30% bigger than the one of all the others watch-dive computers.
The display is a 80×80 pixel 100% matrix.
Bright, Brighter, Brightest!
Set the backlight and the contrast of the display as you prefer, the iDive has a long life USB rechargeable battery, use it as much as you want without the noise to change the battery.
Advanced management of the backlight:
Even the back light management is special in the iDive: totally automatic, totally manual or always on during the dive. You have just to choose!
The computer has Air, Nitrox, Gauge and Free diving modes and supports up to two gas mixes up to 99% oxygen. One of the unique features of the iDive is that it can be connected to the Ratio Oxygen Analyser via the interface port for onboard gas analysis.
The iDive Easy supports up to 2 of the Ratio Wireless Transmitters which allow cylinder pressure information to be displayed on the screen and used with various calculations.
The iDive Easy includes a interface cable that is used to charge the Li-ion battery from any USB socket. It also provides support for data download and firmware updates using the Ratio DiveLogger software.
Need manual or support? Look here: Support.