FORGOT YOUR DETAILS?

rEvo Upgrade Kit 2012

$69.95

The 2012 upgrade kit contains 4 new items that are standard on all rebreathers supplied starting January 1st, 2012.

All rEvo spares are excluded from free shipping.

SKU: 48620718 Category: Brand:

Description

The 2012 upgrade kit contains 4 new items that are standard on all rebreathers supplied starting January 1st, 2012.

Features:

  1. The rEvo Checklist: the use of a check list during your rEvo course was already required for some time now. To make your checks even easier, rEvo produced a double-sided laser engraved checklist. One side contains the ‘closed check’ and the other side contains the ‘pre-jump check’. Details on the content of the checklist can be downloaded from the website. The checklist comes with a bolt-snap, so it can stay together with your unit.
  2. ‘TOP marker’: to ensure that divers don’t make errors when exchanging scrubbers, a marker is added on top of the canister on the exhale lung, indicating that the canister is placed on ‘TOP’ position in the rebreather. After a dive, when you want to exchange one scrubber (cycle), follow exactly this procedure:
    • Take the top canister with the ‘TOP’ marker out of your rebreather
    • Unscrew the ‘TOP’ marker from the canister and immediately empty that canister — you are now sure that you emptied the exhausted canister
    • Screw the ‘TOP’ marker on the remaining (full) canister and either put that canister in the upper position of the unit, or if you are finished diving, in a sealed container or plastic bag
    • Fill up the empty canister and put it in the lower position on the rebreather, or in a sealed container if you finished diving
    • Fill in your log that you refilled the bottom canister with fresh sorb
  3. Injection-molded sensor tray: the new injection-molded sensor tray allows fitting and removing of 5 sensors without unclipping any part. Installing of a sensor is now simply fitting the screw on the sensor and pushing it onto the tray. The new tray also allows fitting of all rMS components.
  4. Canister mesh w/ rubber-molded edge: was designed to avoid metal wires sticking out of the side of the canister mesh and to make filling/tapping of the canisters easier. A triangle-shaped rubber edge is molded on the mesh that closes on the top of each canister.

This upgrade kit is more economical than buying all items individually!

Reviews

There are no reviews yet.

Be the first to review “rEvo Upgrade Kit 2012”
TOP