Shop Online
Shop Online

JETSTREAM MK3 DIN Regulator, Black

JETSTREAM MK3 DIN Regulator, Black

$1,256.00

SKU P0100-005 Categories ,
  • Balanced rolling diaphragm ball valve design
  • Built in Poseidon Thermo-Dynamic anti freeze
  • High flow 2nd stage with upstream servo valve
  • 2nd stage automatic Venturi assist
  • Approved to EN250 cold water standard

This item ships for free

Quantity:

Shop Scuba & Snorkling Gear

Description

The JETSTREAM Mk3 is an updated version of the classic JETSTREAM Regulator. The JETSTREAM Second Stage is a High-Flow Design providing 63 Standard Cubic Feet per Minute (SCFM) Flow of Gas (1,800 liters per minute). The 2nd Stage Regulator uses an Upstream Servo-Valve Design with a Safety Valve Opening Pressure of 261 +/- 14 psi (18 +/- 1 bar) Relief Pressure. The Second Stage has a Durable PVC Housing with Metal Mechanism and Rubber Parts. The Regulator has an Automatic VENTURI Assist and Inhalation Control. The First Stage is a Balanced Rolling Diaphragm Ball Valve Design producing Extreme Leak Tightness. Conventional designs are Sensitive to Wear, Misalignment, and Manufacturing Precision. A Ball Valve always finds its correct place. Combined with the 2nd stage, the enormous capacity of the 1st Stage make the regulator meet the EN 250 Breathing Performance Requirements even at as low as 232 psi (16 bars) Cylinder Pressure. This means that you gain an extra 493 psi (34 bars) of Gas compared to most other regulators! The 1st Stage construction requires Less O-Rings than any other Regulator. The Hose Routing is developed to be optimized for a Redundant System, using Two-Regulators. The HP Ports are Positioned to Accommodate the use of Gas Monitoring Computers e.g. First Stage Mounted HP Sender/Receive Unit. The 1st Stage has a Built-In Poseidon T.D.A, Thermo-Dynamic Anti-Freeze, which requires no maintenance. It is always there, doing the job. It is Thermodynamically-Protecting the Parts which Must-Not-Freeze. It is identified by the Large-Slots in the Cover, allowing the Heat Energy of the Water to Reach-the-Spring. The Cold from the Inside is consequently insulated from the spring, via an Insulation Barrier and Insulating Diaphragm. It is constructed without compromise to any detail to prevent cold reaching the sensitive area. Using Poseidon T.D.A, a Regulator can Free-Flow Air in Fresh Water of 32ºF (0ºC) for at least 10 minutes and afterwards still be completely unaffected. The 1st Stage Regulator is manufactured from Chrome Plated Brass. Regulator System comes complete with a 27.6″ (70 cm) LP Hose. The JETSTREAM Mk3 comes with a Neck Strap, Owner’s Manual and is covered by a 24 month limited warranty.

Additional information

Weight 10 lbs
Dimensions 12 × 6 × 6 in

Reviews

There are no reviews yet.

Be the first to review “JETSTREAM MK3 DIN Regulator, Black”

Your email address will not be published. Required fields are marked *

Search